SilverCrest SLE 200 B2 Mode D'emploi page 22

Cleaning the filter
The performance of the appliance also depends upon how clean the filter is. The
air filter 3 should be cleaned every 2 weeks.
♦ The air filter 3 is located behind the air inlet grille 2. Take hold of the
grip edge of air filter 3 with your fingers and pull it upwards out of the
appliance (see figure 6).
Fig. 6
♦ Vacuum the air filter 3 or clean it with a soft brush. If the air filter 3 is very
dirty, wash it in lukewarm water.
♦ Allow the air filter 3 to dry out completely before replacing it in the
appliance.
Storage
♦ Remove the plug w from the mains power socket.
♦ Wind the power cable w around the cable retainer q on the rear of the
appliance.
♦ Empty the water tank 4 if you are not going to use the appliance for a
long time.
♦ Always store the appliance in an upright position and in a dry and dust-free
environment without direct sunlight.
SLE 200 B2 GB │ IE │ 19 ■