Genesis GHD1260 Manuel D'utilisation page 2

1/2" (13mm) HAMMER DRILL
Operator's Manual
Specifications:
• Model#:
• Input:
• Chuck Capacity: 1⁄2" (13mm)
• No-Load Speed: 0 -3,500 RPM and Reversible.
• Hammer Action: 0-43,500 BPM.
• Auxiliary Handle: 360 degree with depth rod
• Drilling Capacities: Steel: 1⁄2"
Includes: Hammer Drill, Auxiliary Handle, Depth Rod and Chuck Key
WARnIng:
this operator's manual before operating this tool. Save this Manual for future
reference.
Toll-Free Help Line: 1-888-552-8665
WeAR yOuR
SAfeTy GLASSeS
fOReSIGHT IS BeTTeR
THAN NO SIGHT
Look for this symbol to point out important safety
precautions. It means attention!!! Your safety is
involved.
gEnERAL SAFETY RULES
WARnIng:
Some dust created by power sanding, sawing, grinding, drilling, and other
construction activities contains chemicals known to cause cancer, birth defects
or other reproductive harm. Some examples of these chemicals are:
• Lead from lead-based paints,
• Crystalline silica from bricks and cement and other masonry products, and
• Arsenic and chromium from chemically treated lumber.
Your risk from these exposures varies, depending on how often you do this
type of work. To reduce your exposure to these chemicals: work in a well
ventilated area, and work with approved safety equipment, such as those
dust masks that are specially designed to filter out microscopic particles.
2
GHD1260
120V AC, 60Hz, 6.0 Amp
Masonry: 5/8"
Wood: 1-1/4"
To reduce the risk of injury, user must read and understand
WARnIng:
objects being thrown into your eyes, which can result in severe eye damage.
Before beginning tool operation, always wear safety goggles or safety glasses
with side shields and a full face shield when needed. We recommend Wide
Vision Safety Mask for use over eyeglasses or standard safety glasses with
side shields. Always wear eye protection which is marked to comply with ANSI
Z87.1.
1/2" Hammer Drill
Operator's Manual
The Operation of any power tool can result in foreign
GHD1260
6A