Publicité
Les langues disponibles
Les langues disponibles
WARnIng:
bits to break, resulting in bodily injury. Excessive pressure will cause bits to
overheat, damaging the drill bit. Too little pressure keeps the bit from cutting,
dulling the bit edges due to excessive friction.
• If drilling large holes, first drill a smaller hole and then enlarge it to the desired size.
• using lubricants such as oil on the point will help cool the bit, increase drilling action and extend
drill bit life.
• Clamp a backing block to the work piece to prevent binding and distortion when the bit breaks
through the metal.
MAInTEnAnCE
CLEANING
Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from
various types of commercial solvents and may be damaged by their use. use clean cloths to remove
dirt, dust, oil, grease, etc.
WARnIng:
based products, penetrating oils, etc., come in contact with plastic parts.
Chemicals can damage, weaken or destroy plastic which may result in serious
personal injury.
electric tools used on fiberglass material, wallboard, spackling compounds, or plaster are subject
to accelerated wear and possible premature failure because the fiberglass chips and grindings are
highly abrasive to bearings, brushes, commutators, etc. Consequently, we do not recommended
using this tool for extended work on these types of materials. However, if you do work with any of
these materials, it is extremely important to clean the tool using compressed air.
LUBRICATION
This tool is permanently lubricated at the factory and requires no additional lubrication.
TWO-YEAR WARRAnTY
This product is warranted free from defects in material and workmanship for 2 years after date
of purchase. This limited warranty does not cover normal wear and tear or damage from neglect
or accident. The original purchaser is covered by this warranty and it is not transferable. Prior to
returning your tool to store location of purchase, please call our Toll-free Help Line for possible
solutions. THIS PRODUCT IS NOT WARRANTED IF USED FOR INDUSTRIAL OR COMMERCIAL
PURPOSES. ACCESSORIES INCLUDED IN THIS KIT ARE NOT COVERED BY THE 2 YEAR
WARRANTY.
TOLL-FREE HELP LInE
for questions about this or any other GeNeSIS Product, please call Toll-free:
www.genesispowertools.com
Or visit our web site:
©Richpower Industries, Inc. All Rights reserved
Richpower Industries, Inc.
736 Hampton Road
Williamston, SC 29697
Printed in China, on recycled paper
DO nOT FORCE the tool. Too much pressure may cause
Do not at any time let brake fluids, gasoline, petroleum-
888-552-8665
.
13
Publicité
