Télécharger Imprimer la page

Kohler K-1002-H2 Guide De Propriétaire page 6

Publicité

Les langues disponibles

Les langues disponibles

Using the Control Keypad
Power On/Off - Turns the power to the keypad, the hydro-massage system pump, and the heater on
and off. Symbols illuminated in blue indicate available modes/features. Modes will be illuminated
in green when operating.
Outer Ring - Rotate the outer ring to the desired mode. The selected mode will flash (blue).
Activates Mode Selected Button - After selecting the desired mode using the outer ring, press "OK"
to activate. The active mode then illuminates in green.
Up Arrow - Increases the water flow when the waterfall is active.
Down Arrow - Decreases the water flow when the waterfall is active.
Waterfall Mode - When active, a continuous stream of water flows from the waterfall. You may
adjust the flow volume by pressing the up or down arrows.
Chromatherapy Cycle - When active, chromatherapy lights will automatically and continuously
cycle through the eight colors; white, violet, indigo blue, aqua blue, green, yellow, orange, and red.
One cycle through all eight colors takes approximately one minute. Press "OK" if you wish the
active color to remain on. Press "OK" again to resume the cycle.
Chromatherapy Specific Color Selection - When active, you may choose to select one specific color.
Press "OK" repeatedly to cycle through the available colors and stop with the color of your choice.
Heater - The heater automatically engages when the pump is turned on. To turn the heater off,
rotate the outer ring until the heater mode is flashing and press "OK." Press "OK" again to turn the
heater back on. The heater will help maintain the water temperature up to 104°F (40°C).
Indicator Bar - Shows the water flow volume in the various modes.
1030218-5-C
Waterfall
Mode
Chromatherapy-
Specific Color
Activates Mode
Selected
Power
On/Off
Heater
Lighted User Keypad
Increases
Flow
Chromatherapy
Cycle
Decreases
Flow
Indicator Bar
6
Kohler Co.

Publicité

loading

Ce manuel est également adapté pour:

K-1003-h2