Kärcher IVR 100/30 Ef Manuel D'instructions page 16

9. Fit the tensioning ring and screw it in
place.
10.Fit the cleaning device and screw it on.
11.Insert the filter inlay.
In doing so, make sure the tab on the fil-
ter inlay fits into the shaft.
Illustration J
Troubleshooting guide
DANGER
Risk of injury
Danger of the device unintentionally start-
ing and danger of electric shock
Switch off the device and unplug the mains
plug before performing any work on the de-
vice.
Have all checks and work on electrical
parts performed by an qualified technician.
The motor (suction turbine) does not
start up
No electrical voltage present
 Check the socket and the power supply
fuse.
 Check the mains cable and the mains
plug of the device.
Electrical connection
Mains voltage
Phase
Power frequency
Degree of protection
Protection class
Nominal power
Power protection (slow-blowing)
Dimensions and weights
Typical operating weight
Length x width x height
Ambient conditions
Ambient temperature
Device performance data
Tank content
Air quantity
Vacuum
Nominal width of the suction hose
16
The suction power decreases
Nozzle, suction hose or suction pipe
clogged.
 Check the nozzle, the suction hose and
the suction pipe and clean if necessary.
The filter is dirty.
 Clean the filter.
Customer Service department
If the malfunction cannot be corrected, the
device must be checked by the Customer
Service department.
The warranty conditions issued by our rele-
vant sales company apply in all countries.
We shall remedy possible malfunctions on
your appliance within the warranty period
free of cost, provided that a material or
manufacturing defect is the cause. In a war-
ranty case, please contact your dealer (with
the purchase receipt) or the next author-
ised customer service site.
(See overleaf for the address)
Technical data
V
~
Hz
W
A
kg
mm
°C
l
l/s
kPa (mbar)
English
Warranty
IVR 100/30 Ef
400
3
50
IPX4
I
3000
16
172
950 x 715 x 1985
+40
100
87.5
26 (260)
DN70