Protective Grille - Maico EZD 30/ B Série Instructions De Montage Et Mode D'emploi

UK │ 3. Safety instructions and warnings
Observe all safety
instructions!
Risks for children and
people with reduced
physical, sensory or mental
capabilities or a lack of
knowledge. Fan may only be
installed, commissioned,
cleaned and maintained by
people who can safely
recognise and avoid the risks
associated with this work.
Danger of injury if foreign
bodies are inserted into
the unit. Do not insert any
objects in the unit.
Risk of injury from
rotating impeller. Hair,
clothing, jewellery etc. may be
pulled into the fan if you get too
close to it. During operation
always keep far enough away to
prevent this from happening.
Health risk due to deposits on the
unit (mould, bacteria, dust etc.) after
the fan has not been used for a long time.
Clean unit at regular intervals, especially after
the fan has not been used for a long time.
A fan that is not mounted correctly
may result in non-intended operation
or impermissible operation. Ensure that
foreign bodies cannot be sucked into the
unit and ducts. For fans with a free inlet, fit a
protective grille (e. g. Protective grille SG).
14
The fan can only be operated if protec-tion
against accidental contact with the impeller is
guaranteed in accordance with
EN ISO 13857.
Risk of injury and health risk in the
event of changes or modifications or
if components which are not permitted are
used. The unit may only be operated with
original components. Changes and
modifications are not permitted and release
the manufacturer from any guarantee
obligations and liability, e.g. if the device is
drilled at a point which is not permitted.
Risk of injury/damage to unit if the
fan falls during installation/removal
(mounting/dismantling/cleaning/maintena
nce) (weight 11 to 55 kg, depending on
type). During mounting work, ensure that you
are standing securely and cannot lose your
balance and that there is no one under the
unit. When removing and installing the unit,
support it from below with a hand.
Risk of injury when working at
heights. The installation staff must be
sure-footed and comfortable working at
height. Observe applicable accident
prevention requirements. Protect mounting
areas, especially against unauthorised
access, falling objects (loose tiles) and falls.
Wear the necessary protective clothing (hard
hat, protective gloves, goggles). Ensure that
there is no one under the unit during
installation.
High noise emissions near the fan.
Observe sound power levels  tech-
nical documents. When planning, take into
account sound insulation at the installation
site. Use additional visual warning signals to
secure the workplace area.
Risk of injury / Risk of cuts
when handling housing parts with
sharp edges. Wear protective gloves.