2.
Align the appliance in the center.
3.
Use a spirit level to align the appliance exactly
horizontally.
All manuals and user guides at all-guides.com
4.
Adjusting the door
For precise alignment, the appliance door can be slightly
adjusted.
For this purpose, slightly pull out the appliance from the
built-in cut-out. At the top of the appliance there is an
oval opening located on the hinge side. Remove the
cover cap. Slightly loosen both screws (Inbus 5 mm), but
do not remove them!
Preparing Kitchen Units
Fasten the appliance with the included screw. Remove
the transportation lock from the door.
en-us
11