Glem GFS92IX Mode D'emploi Et D'entretien page 44

en
At the end of the "automatic cooking" setting, the display returns on the current time; select one of the 10 cooking functions.
When the current time (Ex.18:00) coincides with the set cooking start time (Ex. 20:30) the oven will automatically switch on and will sound two
beeps to indicate the cooking start time until the set "cooking end" time (Ex. 21:30).
At the end, the oven will automatically switch off and will sound a sequence of five beeps.
this function controls both the automatic switch on and switch off of the oven.
during the whole cooking process, the display shows the current time alternatively to the end of cooking residual time.
demo function:
In some oven types, this function enables to display in a demonstrative mode all of the oven functions, the hot parts will not function.
This demonstration lasts for 2 minutes and 30 seconds.
This function is obtained by rotating the knob
oven functions:
1) By rotating the knob to the "static" function, the oven will automatically start to heat up.
The set temperature is 180°C, cooking happens thanks to the lower and upper elements, without air ventilation.
Once the set temperature is reached, the oven will sound an acoustic signal.
by rotating the knob
instructions For tHe user
Set the desired cooking start time (Example 20:30)
Rotate knob on icon
Set the desired cooking end time (Example 21:30)
to the function: deMo.
it is possible to increase or decrease the temperature depending on one's own cooking habits.
, after 5 seconds it will start to flash.
44