Glem GFS92IX Mode D'emploi Et D'entretien page 43

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 57
en
cooking start time:
When selecting this function, the icon
this function cannot be used whilst cooking food, but only before.
cooking end time:
When selecting this function, the icon
this function can only be used whilst cooking food.
automatic cooking:
This function allows you to cook your food in a fully automatic mode:
instructions For tHe user
will start to flash for 5 seconds:
Set the start time by rotating the knob.
After a few seconds you can set the minutes.
When you have finished setting the desired time, the display will again show the current time with the icon
switched on. By then rotating the knob
set for cooking start time coincides with the current time, a double beep will sound to indicate the start.
During the wait of the set time, the display will show the selected settings (fig. a) even if the oven is
switched off.
this function does not control the switching off of the oven but only the automatic switching on
will start to flash for 5 seconds:
Set the cooking end time by rotating the knob.
After a few seconds you can set the minutes.
during the whole time prior to end of cooking, the display shows the current time alternatively
to the end of cooking residual time.
At the end of the set time for cooking food, the oven will sound a sequence of five beeps and will
automatically switch off.
The oven will remain off until you turn the
this function does not control the automatic switch on but only the automatic switching off.
Rotate the knob
to the icon
select one of the 10 cooking functions and when the time
(Fig. a)
knob again.
. After 5 seconds it will start to flash.
43

Publicité

Table des Matières
loading

Table des Matières