Glem GFS92IX Mode D'emploi Et D'entretien page 42

en
3.2.6 Full electronic prograMMer
The first time you switch on the oven, the time and function icons will start to flash, rotate the knob
By rotating the knob you can select the different menus:
time setting:
When selecting this function, the icon
By rotating the knob
set the hour first of all.
Timer / minute counter:
When selecting this function, both the icon and the hours/minutes
By rotating the knob you can set the desired time.
this function does not control the switch on and switch off of the oven, once the time has expired it will sound a sequence
of beeps.
this function can also be used whilst cooking food.
instructions For tHe user
and the hours/minutes
After a few seconds you can
set the minutes, again rotating the knob
will start to flash:
After a few seconds the display will show
the writing ON. If you decide to display the clock
.
even when the oven is off, have 5 seconds
pass and the display will show the current time
If you do not want to show the clock
when the oven is off, rotate the
to the OFF position. After a few seconds
the time will disappear from the display.
will start to flash
At the end of the set time, the programmer will emit an acoustic signal
to indicate the end.
42
until only the time flashes.
knob