RM Gastro BI 780 E Notice D'installation Et D'emploi page 9

fi g. A
Before you start the boiler check that the duplicator is fi lled with water. The water level must reach
the height of the inspection tap. If no water comes out of this tap when it is opened, the duplicator
must be fi lled. Refi ll in the water, using the fi lling valve (Fig. A). Keep refi lling until the water starts
fl owing out of the open tap. As soon as the water stops fl owing, close the valve.when water coming
out of it.
WARNING!
Never refi ll water in the duplicator while the boiler is in operation, or if the water
in the duplicator is hot.
!!! DANGER OF INJURY OR DAMAGE OF THE DUPLICATOR !!!
9