Inserting Batteries Into The Remote - Sony SCD-XA5400ES Mode D'emploi

Remote
A ?/1 (power) switch (19)
Turns the power of the player on or off.
To let the player enter power-saving mode
(standby mode), press \/1 (power) on the remote
or on the player.
B SA-CD/CD button (24)
Switches between the Super Audio CD layer and
the CD layer of a hybrid disc.
C HDMI button (19)
Sets whether the audio signal is output from the
HDMI OUT jack or not.
D REPEAT button (23)
Performs Repeat Play.
E SHUFFLE button (23)
Performs Shuffle Play.
F ENTER button (22)
Select a track directly.
G N button (19)
X button (19)
x button (19)
Plays back discs, pauses playback, and stops
playback.
H AMS ./> buttons (AMS: Automatic
Music Sensor) (19)
Selects a track.
I m/M buttons (22)
Fast-forwards or fast-reverses the track during
playback.
J DISPLAY button (21)
Turns the display information off or on.
K TIME/TEXT button (20)
Switches the playing time of the track, the
remaining time of the disc, or TEXT information
on the display.
L CLEAR button (23, 23)
Resumes Continuous Play from Repeat Play or
Shuffle Play.
M Number buttons (22)
Select a track directly.
N CONTINUE button (23)
Resumes Continuous Play from Shuffle Play.
O MULTI/2CH button (24)
Selects the playback area when a disc with the 2-
channel area and the multi-channel area (page 8) is
loaded.
P Z button (19)
Opens or closes the disc tray.
Inserting batteries into the
remote
Insert two R6 (size-AA) batteries into the
battery compartment with the + and – correctly
oriented to the markings. When using the
remote, point it at the remote sensor
player.
on the
continued
GB
11