VITRA Tyde Mode D'emploi page 22

Troubleshooting
EN
Error codes
An E and another error code appear
on the display.
An E and the error code 40 appear on
the display.
Motor, control, telescopic guides or
handset does not work.
Your table cannot be moved up/
down.
22
Cause
Internal error
Overload while the table is
being raised or lowered
Bad plug contact
Motor faulty
Control faulty
Handset faulty
Feeder line faulty
Power failure
Solution
Contact your Vitra retailer.
1. The error code E40 will only appear as long as the button is pressed.
2. Your table can now be moved up/down as usual.
Contact your Vitra retailer.
1. Unplug the power cord for 1-2 seconds.
2. Reset the unit.