Cleaning And Maintenance - Dualit DHB2 Manuel D'utilisation

CLEANING AND
MAINTENANCE
IT IS IMPORTANT TO CLEAN THE HAND BLENDER AND
ALL PARTS IN CONTACT WITH FOOD AFTER EACH
USE. ANY OTHER SERVICING SHOULD BE PERFORMED
BY AN AUTHORIZED SERVICE REPRESENTATIVE.
1 PRE-WASH 2 CLEANING
ICONS
1.
2.
3.
To remove food particles Look for these symbols on
from wand, chopping bowl the parts and follow the
and balloon whisk fill a jug instruction:
(or half fill chopping bowl) 1. Not dishwasher safe
with warm soapy water 2. Dishwasher safe
and whizz using the turbo 3. Do not immerse parts
button.
4 DO NOT 5 SHARP BLADES
SUBMERGE
Do not submerge, or Caution: avoid contact
partially submerge the main with the blades. Use a
body or gearbox in any cleaning brush and soap
liquid. suds when washing the
blades.
3 UNPLUG
ALWAYS SWITCH OFF
AND UNPLUG BEFORE
ANY CLEANING.
NEVER USE ABRASIVE
CLEANERS ON ANY OF
THE PARTS.
6
USE DAMP CLOTH
Do not use harsh or
abrasive cleaning agents,
solvents or steel wool. Use
a damp cloth.
18
COMPONENT CLEANING
MAIN BODY Wipe exterior surface with a
damp cloth.
NOT DISHWASHER
SAFE.
GEARBOX Wipe exterior surface with a
damp cloth.
NOT DISHWASHER
SAFE.
WAND Place on the top rack of the
dishwasher, on a sub 40 degree
wash cycle. Keep well away from
the heating elements
Or wash the wand under
running water.
WHISK Place on the top rack of the
dishwasher, on a sub 40 degree
wash cycle. Keep well away from
the heating elements.
Or wash the wand under
running water.
CHOPPER BLADE Place on the top rack of the
dishwasher, on a sub 40 degree
wash cycle. Keep well away from
the heating elements.
Or wash the wand under
running water.
CHOPPER BOWL, Place on the top rack of the
LID & FEED TUBE dishwasher, on a sub 40 degree
COVER wash cycle. Keep well away from
the heating elements.
Or wash the wand under
running water.
JUG Place on the top rack of the
dishwasher, on a sub 40 degree
wash cycle. Keep well away from
the heating elements.
Or wash the wand under
running water.
DRYING
Dry thoroughly with a cloth.
Dry thoroughly with a cloth.
Drain the wand by
resting it upside down
(blades pointing up) and dry
carefully with a cloth. This
allows water to drain from
inside the wand.
Dry thoroughly with a cloth.
Dry thoroughly with a cloth.
Dry thoroughly with a cloth.
Dry thoroughly with a cloth.
19