Maintenance; Washing Chamber; Outside; Fault Message - Getinge 600 Mode D'emploi

All manuals and user guides at all-guides.com

maintenance

Washing chamber

The washing chamber shall be kept free from lime scale deposits. Remove any remaining
deposits by spraying on an ordinary, acid-based cleaning agent. There is no need to rinse
this off - rinsing will take place automatically the next time the cleaning programmes are
run.

Outside

The front and side walls can be cleaned and disinfected with an alcohol-based cleaning
agent, surgical spirit or an ordinary cleaning agent. The control panel is cleaned in the
same way.
Any staining can be removed with an ordinary cleaner for stainless steel.

Fault message

a red lamp lights up

If the red lamp at
some other fault. The display shows a message stating the cause of the fault in plain text.

acknowledging a fault message

Some messages need to be acknowledged before the machine can be returned to run
mode. When the cause of the fault has been found and the fault has been put right, the
fault message is acknowledged as follows:
First press the s button and then the t button. Keep both buttons pressed at the
same time for 10 seconds.
The machine is now ready to operate. Re-run the aborted program if the items are still in
the machine. If the fault persists, call service personnel.

Power failure

If the power fails during a process, the machine remains locked. When the power
returns , the machine automatically restarts the interrupted process.
Page 14 of 128
lights up, disinfection has been aborted owing to low temperature or
O