HP 9200c Digital Sender Guide De Mise En Route page 32

Problem
An e-mail transmission did not arrive at the
destination e-mail address.
A document that you sent to a folder did not
arrive at the destination folder.
The bottom of a page that you sent is cut off.
The control panel is using the wrong language.
26 Chapter 3 Troubleshooting and customer support
All manuals and user guides at all-guides.com
Action to take
● If you typed the e-mail address at the control
panel, resend the e-mail message, making
sure that you type the address correctly and
that it is in the correct format (has no
spaces, contains the required @ sign, and
contains the required period).
● Resend the e-mail. Make sure that you type
the name in the correct format in the From:
field so that the message is not rejected and
so that you receive a message back if the e-
mail transmission fails.
● Have the network administrator verify that
the SMTP server is functioning.
● Resend the document.
● Verify whether the file name might have
been modified to resolve a duplicate-file-
name error.
If the document was sent from the glass, the
document page might be too long. The maximum
length for documents scanned from the glass is
A4, or 210 x 297 mm (8.27 x 11.69 inches).
Use the control-panel menu to set the correct
language.
1. Push the M button.
ENU
2. Select CONFIGURE DEVICE on the control-
panel display (the third menu item).
3. Touch SYSTEM SETUP (the fourth menu
item).
4. Scroll down and touch LANGUAGE (the last
menu item).
5. Touch the correct language.
ENWW