Publicité
Les langues disponibles
Les langues disponibles
Note: The outer surface of the appliance
may become hot in use.
Note: Hot steam may escape from the lid.
Tilt the lid towards you when removing so
steam is on opposite side.
Electrical safety
Before use, check that the mains voltage
corresponds to the voltage on the rating
plate.
This product must be earthed.
Always check that the mains
voltage corresponds to the
voltage on the rating plate.
• Appliance plugs must match the outlet.
Never modify the plug in any way.
• Do not use any adapter plugs
with earthed (Class 1) appliances.
Unmodified plugs and matching outlets
will reduce the risk of electric shock.
• To avoid the risk of electric shock, do
not immerse the cord, plug or motor
unit in water or other liquid.
Extension cables & class 1 product
• A 3 core cable must be used as
your tool is earthed and of class 1
construction.
• Up to 30m (100 ft) can be used without
loss of power.
• If the supply cord is damaged, it must
be replaced by the manufacturer or an
authorised BLACK+DECKER Service
Centre in order to avoid a hazard.
Labels onAppliance
The following pictograms along with the
date code are shown on the tool:
All manuals and user guides at all-guides.com
(Original instructions)
Warning! Hot surface.
Features
1. Lid
2. Stainless steel inner pot
3. Stainless steel rack
4. Insulated handle
5. Stainless steel pan
6. Thermostat control
7. Base
8. Electric plug
9. Indicater light
10. Minimum fill mark
11. Maximum fill mark
Use
Boiling water
• Place the appliance on a flat, stable
surface.
• Pour the required amount of water into
the plate & the ingredients. Fit the lid &
place the appliance on the power base.
• Connect the power base to a suitable
supply.
• Rotate the heating control to the
required setting. The lamp will
illuminate and the water will be heated.
ENGLISH
5
Publicité
