Télécharger Imprimer la page

Black & Decker MK100 Mode D'emploi page 3

Publicité

Les langues disponibles

Les langues disponibles

Intended use
Your BLACK+DECKER MK100 Multi Cooker
has been designed for boiling and steaming
food.
This appliance is intended for indoor
household use only.
This appliance is not intended to be used in:
• Staff kitchen areas in shops;
• Offices and other working environments;
• Farm houses;
• By clients in hotels, motels and other
residential type environments;
• Bed and breakfast type environments or
any other non-household environments.
In order to avoid a hazard due to
inadvertent resetting of the thermal cut-
out, this appliance must not be supplied
through an external switching device, such
as a timer, or connected to a circuit that is
regularly switched on and off by the utility.
Safety instructions
• Warning! When using mains-powered
appliances, basic safety precautions,
including the following, should always
be followed to reduce the risk of fire,
electric shock and personal injury.
• Read all of this manual carefully before
using the appliance.
• The intended use is described in this
manual. The use of any accessory or
attachment or the performance of any
operation with this appliance other than
those recommended in this instruction
manual may present a risk of personal
injury.
All manuals and user guides at all-guides.com
(Original instructions)
• Retain this manual for future reference.
Using your appliance
• Always take care when using the
appliance.
• Do not use the appliance outdoors.
• Do not operate the appliance if your
hands are wet. Do not operate the
appliance if you are barefoot.
• Always open the lid so that any escape
of steam is away from hands and body.
• Guide the power supply cord neatly
so it does not hang over the edge
of a worktop and cannot be caught
accidentally or tripped over.
• Never pull the power supply cord to
disconnect the plug from the socket.
Keep the power supply cord away from
heat, oil and sharp edges.
• If the supply cord is damaged, it must
be replaced by the manufacturer, its
service agent or similarly qualified
persons in order to avoid a hazard.
• Disconnect the appliance from the
power supply when not in use, before
filling with water and before cleaning.
• Do not fill the appliance above the
maximum level.
• Overfilling the appliance could cause a
hazard.
• Overfilling the appliance could cause
water to spill.
Warning! If water spills onto the appliance,
disconnect it from the electrical supply and
allow the internal parts to dry thoroughly
before using it again.
ENGLISH
3

Publicité

loading