Hikmicro PANTHER 2.0 Serie Guide De Démarrage Rapide page 131

Directive 2012/19/EU (WEEE Directive): Products marked with this
symbol cannot be disposed of as unsorted municipal waste in the
European Union. For proper recycling, return this product to your
local supplier upon the purchase of equivalent new equipment, or
dispose of it at designated collection points. For more information
see: www.recyclethis.info.
Directive 2006/66/EC and its amendment 2013/56/EU (Battery
Directive): This product contains a battery that cannot be disposed
of as unsorted municipal waste in the European Union. See the
product documentation for specific battery information. The
battery is marked with this symbol, which may include lettering to indicate
cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the
battery to your supplier or to a designated collection point. For more
information see: www.recyclethis.info.
Safety Instruction
These instructions are intended to ensure that user can use the product
correctly to avoid danger or property loss. Please read all the safety
information carefully before using.
Laws and Regulations
Use of the product must be in strict compliance with the local electrical safety
regulations.
Transportation
Keep the device in original or similar packaging while transporting it.

Keep all wrappers after unpacking them for future use. In case of any failure

occurred, you need to return the device to the factory with the original wrapper.
Transportation without the original wrapper may result in damage on the

device and the company shall not take any responsibilities.
Do not drop the product or subject it to physical shock. Keep the device away

from magnetic interference.
Power Supply
The input voltage for the device should meet the Limited Power Source

(5 VDC, 2 A) according to the IEC61010-1 standard. Please refer to actual
products and technical specifications for detailed information.
The power source should meet limited power source or PS2 requirements

according to IEC 62368-1 standard.
Make sure the plug is properly connected to the power socket.

DO NOT connect multiple devices to one power adapter, to avoid

over-heating or fire hazards caused by overload.
The battery charger is included in the package. The input voltage for the

supplied battery charger should meet the Limited Power Source (5 VDC, 2 A).
Battery
Improper use or replacement of the battery may result in explosion hazard.

Replace with the same or equivalent type only. Dispose of used batteries in
conformance with the instructions provided by the battery manufacturer.
The battery type is 18650 with the protection board, and the battery size

should be 19 mm × 70 mm. The rated voltage and capacity are
3.6 VDC/3.20 Ah (11.52 Wh).
Make sure the battery temperature is between 0 °C to 45 °C (32 °F to 113 °F)

when charging.
For long-term storage of the battery, make sure it is fully charged every half

year to ensure the battery quality. Otherwise, damage may occur.
Do not charge other battery types with the supplied charger. Confirm there is

no flammable material within 2 m of the charger during charging.
The battery cannot be charged with external power source directly.

Confirm there is no flammable material within 2 m of the charger during

charging.
DO NOT place the battery near heating or fire source. Avoid direct sunlight.

DO NOT place the battery in the reach of children.

DO NOT swallow the battery to avoid chemical burns.

The device cannot be charged. Please use the supplied charger to charge the

battery.
Maintenance
If the product does not work properly, please contact your dealer or the

nearest service center. We shall not assume any responsibility for problems
caused by unauthorized repair or maintenance.
Wipe the device gently with a clean cloth and a small quantity of ethanol, if

necessary.
If the equipment is used in a manner not specified by the manufacturer, the

protection provided by the device may be impaired.
Clean the lens with soft and dry cloth or wiping paper to avoid scratching it.

Using Environment
Make sure the running environment meets the requirement of the device. The

operating temperature shall be -30 °C to 55 °C (-22 °F to 131 °F), and the
operating humidity shall be from 5% to 95%.
Place the device in a dry and well-ventilated environment.

DO NOT expose the device to high electromagnetic radiation or dusty

environments.
DO NOT aim the lens at the sun or any other bright light.

When any laser equipment is in use, make sure that the device lens is not

exposed to the laser beam, or it may burn out.
Avoid equipment installation on vibratory surface or places subject to shock

(neglect may cause equipment damage).
Emergency
If smoke, odor, or noise arises from the device, immediately turn off the power,
unplug the power cable, and contact the service center.
129