Publicité
Les langues disponibles
Les langues disponibles
Preparing your harness
Back Protection
Your harness is equipped with an integrated back protector, of
the foam-bag type. This protection has been certified in the
laboratory according to the following criteria:
- CE - SP-003 09/2021
- EN - Fpr EN 1651-2018
- LTF - 2. DV LuftGerPV §1, Nr. 7C
On delivery, your back protector complies with all of these
criteria.
Avoid any contact of the protection with pointed or sharp objects
Avoid any contact of the protection with pointed or sharp objects
which could damage the protection envelope.
which could damage the protection envelope.
If you have any doubts about the condition of your back protector,
If you have any doubts about the condition of your back protector,
please contact your dealer or our customer service department as
please contact your dealer or our customer service department as
soon as possible.
soon as possible.
The back protection can also be subjected to more insidious
attacks, such as repeated small fricton (on the ground before
take-off, or on landing), or UV damage.
Airbag operation and application:
The airbag consists of a single inflation chamber. In flight, with
the help of the relative wind, the air enters the 2 side scoops
and fills this chamber located under the pilot's seat.
In the event of a violent impact, the safety valve may be
activated. Simply push it back inwards to restore the airbag to
its nominal working order.
41
K-FLEX
Publicité
