Kortel Design KRUYER III Notice D'utilisation page 42

Preparing your harness
Back Protection
Your harness is not originally equipped with an integrated
back protector.
However, it is possible to add one in option: the Sak III.
This protection has been certified in the laboratory according
to the criteria:
- CE - SP-001 02/2016
- EN - Fpr EN 1651-2018
- LTF - 2. DV LuftGerPV §1, Nr. 7C
On delivery, your back protector complies with all of these
criteria. The best protection is offered when it is fully inflated.
Avoid any contact of the protection with pointed or sharp objects Avoid any contact of the protection with pointed or sharp objects
which could damage the protection envelope. which could damage the protection envelope.
Refer to the Sak III assembly and use instructions.
Refer to the Sak III assembly and use instructions.
If you have any doubts about the condition of your back protector, If you have any doubts about the condition of your back protector,
please contact your dealer or our customer service department as please contact your dealer or our customer service department as
soon as possible. soon as possible.
Airbag operation and implementation:
The airbag comprises 2 inflation chambers, an upper and a
lower one. In flight, with the help of the relative wind, the air
enters the side scoops and fills the upper chamber. The lower
chamber is filled through the front scoop.
42
KRUYER III