Basic Operations; Switching Power On/ Off; Adjusting The Volume; Selecting A Zone And Channel - Kenwood NX-5000 Série Guide De L'utilisateur

SWITCHING POWER ON/ OFF

Turn the Power switch/ Volume control clockwise to switch the
transceiver power ON.
Turn the Power switch/ Volume control counter-clockwise to
switch the transceiver power OFF.

ADJUSTING THE VOLUME

rotate the Power switch/ Volume control to adjust the volume.

SELECTING A ZONE AND CHANNEL

1 Select the desired zone using the 4-way D-pad or the
keys programmed as [Zone Up]/ [Zone Down]. Each zone
contains a group of channels.
2 Select the desired channel using the Selector knob or the
keys programmed as [Channel Up]/ [Channel Down].
Each channel is programmed with settings for transmitting
and receiving.
• The default setting for the Selector knob is [Channel Select].
• The transceivers may have names programmed for zones and
channels. The zone name and channel name can contain up to
16 and 14 characters respectively. While selecting a zone, the
zone name will appear above the channel name.
• If programmed by your dealer, your transceiver will announce the
zone and channel numbers as you change them.

BASIC OPERATIONS

23