Kenwood NX-5000 Série Guide De L'utilisateur page 20

c Transmit/ Receive/ Battery low indicator
The indicator lights in different colors to indicate the current
status of the transceiver.
Lights red while transmitting and green while receiving.
Flashes red when the battery power is low while
transmitting. Replace or recharge the battery pack when the
battery power is low.
Note:
• This indicator can be disabled by your dealer.
d Lever switch
Switch the toggle position to activate its programmable
function. Switch to position A or B to turn on the function
programmed to it.
e Auxiliary (orange) key
Press to activate its programmable function.
f Side 1 key
Press to activate its programmable function.
g PTT (Push-To-Talk) switch
Press and hold, then speak into the microphone to call a
station.
h Side 2 key
Press to activate its programmable function.
i Side 3 key
Press to activate its programmable function.
j LCD Display
Refer to the display. {p. 20}
k [
] key
Press to activate its programmable function. The default
key setting is [Menu].
l [
] key
Press to activate its programmable function. The default
key setting is [Function].
18