Cleaning - Bartscher 150.340 Mode D'emploi

6.2 Cleaning

The device should be cleaned regularly.
o
CAUTION!
Do not clean the device under running water, do not immerse in any liquid and
protect connecting socket against ingress of water.
Cleaning of thermostat
WARNING! Danger of burn!
Let the device cool off first before removing the temperature control as the
temperature sensor of the temperature control might still be hot after use.
Put the thermostat in the OFF position,
o
remove the plug from its socket and then
remove the thermostat only after the unit
cools.
Clean the thermostat with a soft, dry paper cloth.
o
Never clean the thermostat by wetting it, and never submerge it in water or other
o
fluids.
WARNING! Hazard via electrical current!
Water or moisture inside the thermostat may cause electrocution or fire.
Cleaning the heating plate
o After it cools, the unit may be cleaned. Cover the frame with a hand, so that water
does not get inside.
o Remove any scraps of food using a paper cloth. If they cannot be easily removed,
pour a small amount of water into the heating plate and turn the thermostat to ON.
The plate will heat up and become easier to clean.
o Clean the heating plate with a soft, moist cloth or sponge and a mild cleaning agent.
o Do not clean the plate when it is hot. This can damage the unit or cause fire.
o Do not use nylon brushes when cleaning the unit. This can damage its surface.
o After drying, place a thin layer of cooking oil on the plate's surface.
- 28 -