Beko BHCB67841BBHSI Manuel D'utilisation page 19

2. Release the locks of the carbon filter
from their slots (1).
6 Troubleshooting
If the problem persists after following the
instructions in this section, contact your
vendor or an Authorized Service. Never try
to repair your product yourself.
Product is not working.
• Fuse may be faulty or blown. >>> Check
the fuses in the fuse box. Change them if
necessary or reactivate them.
• The product may not be plugged in. >>>
Check if the product is plugged in to the
outlet or not.
• The speed button may not be set. >>>
Press/touch the desired speed button.
• There may be no electricity. >>> Ensure
the mains is operational and check the
fuses in the fuse box. Change the fuses
if necessary or reactivate them.
Hood light is not on.
• Hood lamp may be faulty. >>> Contact
your local dealer where you purchased
your product or the Customer Service,
and ensure that the lamp is replaced.
• There may be no electricity. >>> Ensure
the mains is operational and check the
fuses in the fuse box. Change the fuses
if necessary or reactivate them.
3. Remove the pins on the other end of the
carbon filter from its socket and pull it
out in the direction of the arrow (2).
4. Reverse this process, first insert the
tabs into the slot of the new carbon fil-
ter and then push the locks upwards.
5. Install the aluminium filters.
EN / 19
EN
RO
FR