Télécharger Imprimer la page

Beko BHCB67841BBHSI Manuel D'utilisation page 18

Publicité

Les langues disponibles

Les langues disponibles

• Some detergents or cleaning agents may
cause damage to the surface. Do not use
abrasive detergents, cleaning powders,
cleaning creams or sharp objects during
cleaning.
• Do not use steam cleaning products for
cleaning.
Product cleaning
• The product should be thoroughly
cleaned after each use. Thus, food
residues are easily cleaned and these
residues are prevented from burning
when the product is used again later.
• No special cleaning agent is required for
cleaning the product. Clean the product
using dishwashing detergent, warm wa-
ter and a soft cloth or sponge and dry it
with a dry cloth.
• Do not use acid or chlorine-containing
cleaning agents to clean stainless or
inox surfaces and handles. Clean with a
soft soapy cloth and liquid (non-scratch-
ing) detergent, taking care to wipe in one
direction.
• There are sensors in the backside of the
product's glass cover. Do not damage
these sensors during cleaning. (For
model C)
5.2 Aluminium Filter
This filter serves to retain oil particles in
the air. It is recommended to clean the
filter once a month under normal usage.
To achieve this:
1. Remove the aluminium filters.
2. Wash the filters in water using liquid
detergent and reinstall after drying.
Aluminium filters may change colour as
they are washed; this is normal and does
not require replacing your filters.
You can also wash the aluminium
filter in the washing machine.
(max. 70 °C)
Removing aluminium filters
1. Push the aluminium filter lock forward.
2. Lower the filter slightly and pull it for-
ward. Otherwise, you can tilt the filter.
3. Reinstall the aluminium filter in its slot
after flushing by following the above
steps in reverse.
5.3 Hood Lamp
In the event of a lamp malfunction in the
hood, contact your local dealer or the Cus-
tomer Service, and ensure that the lamp is
replaced.
5.4 Carbon Filter (Usage without a
flue)
General warnings
• If you have installed your product
without a flue, you should replace your
carbon filters every 4 months in normal
use. You can obtain the carbon filter
from Authorized Services.
• The carbon filter should never be
washed.
• If you do not follow the rules for cleaning
and replacing the filters of your hood,
you may cause a fire.
Removing carbon filter
1. Remove the aluminium filters.
EN / 18

Publicité

loading