Publicité
Les langues disponibles
Les langues disponibles
6. Troubleshooting
No.
Malfunction
1
DEEBOT is not charging�
DEEBOT cannot return to the
2
Docking Station�
DEEBOT gets stuck while
3
working and stops�
DEEBOT returns to the
4
Docking Station before it has
finished cleaning.
24
EN
All manuals and user guides at all-guides.com
Possible Causes
DEEBOT is not switched ON�
DEEBOT has not connected to the Docking
Station�
The battery is completely discharged�
The Docking Station is not correctly placed�
DEEBOT is tangled with something on the floor
(electrical wires, curtains, carpet fringing, etc�)�
When the battery gets low, DEEBOT
automatically switches to Return to Charger
Mode and returns to the Docking Station to
recharge itself�
Working time varies according to floor
surface, room complexity and the Cleaning
Mode selected�
Solutions
Switch ON DEEBOT�
Be sure that the robot's Charging Contacts have
connected to the Docking Station Pins�
Re-activate the battery� Switch ON DEEBOT� Place
DEEBOT on the Docking Station by hand, remove after
charging for 3 minutes, repeat 3 times; then charge
normally�
Refer to section 3�2 to correctly place the Docking Station�
DEEBOT will try various ways to free itself� If it is
unsuccessful, manually remove the obstacles and restart�
This is normal� No solution necessary�
This is normal� No solution necessary�
Publicité
