Publicité
Les langues disponibles
Les langues disponibles
D2-3— Insert the roller from the side, and then
rotate the roller cover from the unlock
position to the lock position until it
clicks in place.
Cleaning the Cleaning Head
D3
and Dirty Water Pipe
1. Remove the dirty tank and the roller. Switch
off the vacuum cleaner and stabilize the
body.
2. Clean the roller slot and dirty water pipe with
the maintenance brush provided.
3. Wipe the charging contacts with a dry cloth.
4. Reinstall the roller and dirty tank in place.
D3-1—Charging Contacts
Note:
Do not wash the cleaning head directly with water.
Cleaning the Charging Dock
D4
Tray
D4-1—
Grasp the side handles of the tray and
pull upward.
D4-2—
Rinse the tray with water and reinstall it
in place after drying.
Note:
Only remove and wash the tray. Do not wash any other
parts of the charging dock.
Basic Parameters
Body
Model
WD2H2A
Weight
4.1 kg
Rated power
260 W
Rated voltage
21.6 V
Charging time
< 4 hours
21.6 V/4000 mAh (TYP)
Battery
Lithium-ion battery
Power Supply
Model
E060-1P300190VU
Rated input
100–240 V~ 50–60 Hz, 1.5 A
Rated output
30 V
1.9 A
21.6 V/4000 mAh (TYP)
Battery
Lithium-ion battery
11
Holiday Energy
Saving Function
Turn off the device, press and hold "Change
Mode" button, put the device back to the dock
and wait for 10 seconds until you hear a voice
alert then release the button. This will activate
Holiday mode.
In this mode the device will switch to Low
Power mode to minimize power consumption.
This includes a dimming of the LED indicator,
and the stopping of all non-charging related
functions including cleaning, remote control
over WiFi, and more.
To deactivate Holiday mode, remove the
vacuum cleaner from the charging dock, press
and hold "Power" for 10 seconds and press
"Power" again. Screen has brightened and the
vacuum cleaner has exited Holiday mode.
Publicité
