Publicité
Les langues disponibles
Les langues disponibles
English
LOADING NAILS
● When loading nails into Nailer,
1) remove battery from the nailer;
2) do not pull trigger;
3) do not depress push lever; and
4) keep nailer pointed downward.
2–Action Nail Feeding!
(1) Insert nail strip into the back of the magazine.
Magazine
(2) Slide the nail strip forward in the magazine.
(3) Pull the nail feeder (B) back to engage the feeder
knob to the nail strip.
Nail feeder (B)
NOTE:
● Quietly push the nail feeder (B) and feeder knob
against the nail.
If the nail feeder (B) and feeder knob are released
from backward the magazine and bumped against
the nail, the connecting paper or plastic of the nail
can be damaged.
26
WARNING
Feeder knob
● Use nail strip of more than 10 nails.(NR1890DC)
● Use an unbroken nail strip with nails of all the same
length. (NR1890DR)
The Nailer is now ready to operate.
Removing the nails:
1 Pull the feeder knob backward.
2 Return the feeder knob forward quietly while pushing
the nail feeder (B).
3 Pull out nails from the back of the magazine.
1
2
NAILER OPERATION
Read section titled "SAFETY" (pages 5 – 12).
● Operators
work area MUST wear safety
glasses with side shields
which conforms to ANSI Z87.1
specifi cations.
● NEVER point tool at yourself
or others in work area.
● Keep fi ngers AWAY from
trigger when not driving nails
to avoid accidental fi ring.
● Do not use the electrical cord if damaged.
Have it repaired immediately.
Feeder knob
Nail feeder (B)
Nails
3
DANGER
and
others
WARNING
in
Publicité
