Worx WG705E Traduction Des Instructions Initiales page 11

SyMBOLS
Read instruction handbook before
operation this machine
Keep bystanders away
Blade continues to rotate after
the machine is switched off. Wait
until all machine components
have completely stopped before
touching them.
Beware of sharp blades. Blades
continue to rotate after the motor
is switched off- Remove plug from
mains before maintenance or if
cord is damaged.
Keep the supply flexible cord away
form the blades.
Double Insulation
Waste electrical products should
not be disposed of with household
waste. Please recycle where
facilities exist. Check with your
Local Authority or retailer for
recycling advice.
Lawn mower
All manuals and user guides at all-guides.com
INTENDED USE
This product is intended for domestic lawn
mowing.
ASSEMBLy
according above information, make sure the
accessories are completed.
1. FITTING ThE hANDLE (See Fig.A1, A2,
A3)
Remove the screws (X 2) on the both side of
poles.
1) Insert the lower handle (8) into the holes
2) Secure with the screws.(Fig A1)
3) Attach the upper handle (6) with the bolts
NOTE: Ensure the bolts are fully inserted
through the handles before fitting the handle
knobs.
Attach the cable clips (3) provided, to the upper
and lower handle. Insert the cable into the clips
ensuring there is enough cable slack. (Fig A3)
2. GRASS COLLECTION bAG ASSEMbLy
Connect the grass box handle to the box top as
shown in F ig B1-B4.
1) Press the front of the handle briefly. (Fig B2)
2) Then push it forward. (Fig B2)
3) Push down the back of the handle. (Fig B2)
4) Finally, clip the plastic clips over the metal
shown in Fig b1.
3. GRASS COLLECTION bAG FITTING
(See Fig C1,C2,C3)
1) Turn the mower off, wait until blade stops.
2) Raise the safety flap (9) and hold it up
3) Pick up the grass bag by the handle, and
4) Release the safety guard to lock the grass
IMPORTANT! Before you assemble
the lawn mower, check the accessories
provided.
and handle knobs (7) to the lower handle
(8).( Fig A2)
frame. (Fig B3)
wARNING: Don't fit the handle in
reversed direction. Fit the handle as
position grass bag on the lower hooks (a)
on the mower deck.( See Fig C2)
bag into position. Ensure the grass bag is
11 11
EN