Slave Mode - Cameo RGBWA+UV WITH W-DMX Manuel D'utilisation

Slave
Menu
Settings
DMX Address
System Info
DMX Mode
DMX Delay
Stand Alone

SLAVE MODE

Menu
Slave
Standard slave mode: Starting from the main display, press MENU to enter the main menu. Using UP and DOWN, select the menu item
DMX Address
Settings
Slave, confirm with ENTER, then select Slave Group 0 (Slave Group 00) and confirm again with ENTER. Connect the slave and the master
DMX Mode
System Info
unit (same model, same software version) with a DMX cable and enable one of the standalone modes on the master unit (Static, Color
DMX Delay
Macro, Auto, Loop, User Color). The slave unit will now follow the master unit.
Stand Alone
Slave
Menu
Settings
DMX Address
System Info
DMX Mode
DMX Delay
DMX Delay
DMX Group
Stand Alone
Controller by DMX?
Menu
Delay
Slave
DMX Address
Settings
DMX Mode
System Info
DMX Delay
Stand Alone
Slave
Advanced slave mode: If you wish to control the slave units in master/slave mode using one of the standalone modes Auto or Loop, the
Settings Menu
control signal can be reproduced with a time delay of up to 6 steps. The delay is set in the submenu item Delay in the relevant standalone
DMX Address System Info
mode, the delay factor is set in the slave menu of the corresponding spotlight. This is a simple way to create a running light effect with a
large number of spotlights that are all the same model and have the same software version. This is otherwise only possible using a suitable DMX Mode
DMX controller and time-consuming programming.
DMX Delay
Stand Alone
Scheinwerfer(gruppe) 0
Menu
kein Delay
Slave
DMX Address
DMX DMX Delay
Settings
Group
Controller
DMX Mode
System Info
DMX Delay by DMX?
DMX Delay
0.5s
Stand Alone
Menu
Slave
DMX Address
Settings
DMX Mode
System Info
DMX Delay
Stand Alone
Menu
Assign the spotlights to one of up to six groups according to preference, whereby several spotlights can be assigned to one group. The
Slave
DMX Address
group number is also the factor by which the delay time set in the master unit is multiplied (see setup example).
Settings
DMX Mode
System Info
DMX Delay
Slave Group 0
Stand Alone
Menu No delay
Slave Group 0
Slave
DMX Address
Settings
Master-Einheit
DMX Mode
Loop
System Info
Delay 0.5s
DMX Delay
Stand Alone
Menu
Slave
DMX Address
Settings
DMX Mode
System Info
DMX Delay
Stand Alone
Slave
Settings
System Info
12
User Color
Stand Alone
Static
Color Macro
Auto
Loop
Stand Alone
User Color
Static
Color Macro
Auto
Loop
User Color
Slave Group
00
DMX Delay
0 Group 1 Group
No by DMX? No by DMX?
Slave Group
0.0s Delay 1.5s Delay
00
Slave Group
01 - 06
Scheinwerfer(gruppe) 1 Scheinwerfer(gruppe) 2
0,5s Delay
Slave Group
DMX Delay
01 - 06
0 Group 1 Group
Yes by DMX? Yes by DMX?
Slave Group 1
0.5 s delay
Slave Group 1
kein Delay 0,5s Delay
Mode Mode
Slave
Slave
1.Step
User Color
2.Step
Color 1 Dimmer
3.Step
|
4.Step
Color 8
User Color
Color 1 Dimmer
|
Color 8
Mode
Slave
DMX Delay DMX Delay
2 Group 3
No by DMX? No
Mode
1.5s Delay 1.5s
Slave
DMX Delay
Group 3
by DMX? No
Delay 1.5s
DMX Delay
Group 3
Mode
by DMX? No
Slave
Delay 1.5s
Scheinwerfer(gruppe) 3
1s Delay 1,5s Delay
Mode
DMX Delay DMX Delay
Slave
2 Group 3
Yes by DMX? Yes
DMX Delay
Group 3
by DMX? Yes
DMX Delay
Group 3
by DMX? Yes
Slave Group 2 Slave Group 3
1 s delay 1.5 s delay
Slave Group 2 Slave Group 3
1s Delay 1,5s Delay
Mode Mode
Slave Slave
Mode
Slave
Mode
Slave
Red
Color x
Color 1
Blackout
Strobe
-------
Red
Green
Color x
Blue
White
Strobe
Amber
Red
UV
Green
Blue
White
Amber
UV
DMX Delay DMX Delay
Group 4 Group
by DMX? No by DMX?
Delay 1.5s Delay
Scheinwerfer(gruppe) 4 Scheinwerfer(gruppe) 5
2s Delay 2,5s Delay
DMX Delay DMX Delay
Group 4 Group
by DMX? Yes by DMX?
Slave Group 4 Slave Group 5
2 s delay
Slave Group 4
2s Delay
Mode
Slave
5
No
1.5s
5
Yes
2.5 s delay
Slave Group 5
2,5s Delay
Mode
Slave