Cameo RGBWA+UV WITH W-DMX Manuel D'utilisation page 11

Settings
System Info
Menu
Menu
DMX Address
DMX Address Group
DMX Mode
DMX Mode by DMX?
STANDALONE MODE LOOP
DMX Delay
DMX Delay Delay
The standalone mode Loop allows you to individually configure, store and access up to four different color changing programmes. Bright-
Stand Alone
ness, step time, fade time and delay (signal delay) are also separately configurable. Stand Alone
Slave
Starting from the main display, press MODE to enter the main menu. Using UP and DOWN, select the menu item Standalone and confirm
Slave
Settings
with ENTER. Using the UP and DOWN buttons, select the stand-alone mode Loop and confirm with ENTER. Now use UP and DOWN to select
Settings Group
System Info
the desired loop (Loop 1 – Loop 4) and confirm with ENTER.
System Info by DMX?
Delay
Menu
DMX Address
DMX Mode
Group
DMX Delay
by DMX?
Stand Alone
Delay
Slave
Settings
Menu
System Info
DMX Address
DMX Mode
DMX Delay
Menu
Stand Alone
This will take you to the submenu for setting the submenu items (see table, select with UP and DOWN, confirm with ENTER, change value or
DMX Address
Slave
status with UP and DOWN, confirm with ENTER). The settings for each loop are made separately and are retained even after restarting the
DMX Mode
Settings
device.
DMX Delay
System Info
Stand Alone
Slave
STANDALONE MODE LOOP (Loop 1 – Loop 4)
Settings
Dimmer Sets brightness
Menu
System Info
DMX Address
Step time Sets step time
DMX Mode
Fade time Sets fade time in percent
DMX Delay
Menu
Delay Delay time for slave groups
Stand Alone
DMX Address
Step 1 15 colors from Color Macro
Slave
DMX Mode
Settings
4 colors from User Color
DMX Delay
System Info
Stand Alone UV light
Slave
Blackout
Settings
Menu
Step 2 „
System Info
DMX Address
Step 3 15 colors from Color Preset
DMX Mode
4 colors from User Color
DMX Delay
UV light
Stand Alone
Menu
Slave
DMX Address Blackout
Settings
DMX Mode
------
System Info
DMX Delay
Step 4 „
Stand Alone
Menu
Slave
DMX Address
Settings
STANDALONE MODE USER COLOR
DMX Mode
System Info
The standalone mode User Color allows you to store eight individual color presets for overall brightness, stroboscope (strobe) and a color
DMX Delay
mix of R, G, B, W, A and UV directly in the device.
Stand Alone
Starting from main display 1, press MENU to enter the main menu. Now use the controls UP and DOWN to select the menu item Stand
Menu
Slave
Alone and confirm with ENTER. Again use UP and DOWN to select the standalone mode User Color and confirm with ENTER. Using UP and
DMX Address
Settings
DOWN, now select the desired preset (color 1 to 8) and confirm with ENTER. Use UP and DOWN to select the menu item you wish to edit and
DMX Mode
System Info
confirm with ENTER. You can now use UP and DOWN to configure the desired setting from 000 to 255. The strobe effect values correspond
DMX Delay
to those in channel 2 of the DMX table 4CH and channel 3 of tables 13CH1 and 20CH. Confirm all entries with ENTER.
Stand Alone
Slave
Menu
Settings
DMX Address
System Info
DMX Mode
DMX Delay
Stand Alone
Menu
Slave
DMX Address
Settings
DMX Mode
System Info
DMX Delay
Stand Alone
Slave
Menu
Settings
DMX Address
System Info
DMX Mode
DMX Delay
Stand Alone
Slave
Settings
System Info
Stand Alone
DMX Delay
Static Program 1
0
Color Macro
No/Yes
Auto Program 6
0.0s
Loop
User Color
DMX Delay DMX Delay
0 Group
No by DMX?
0.0s Delay
Stand Alone
Static Loop 1
DMX Delay
Color Macro
0
Auto Loop 4
No
Loop
0.0s - 2.0s
User Color
Stand Alone
Static Dimmer
Strobe
Color Macro
Auto
Stand Alone User Color
Loop
Static Color 1
User Color
Color Macro
Auto Color 8
Amber
Loop
User Color
Color Macro
Stand Alone
Static Color O
Color Macro
Amber
Auto
Slave Group
Loop Yellow W
00
User Color
Turquoise
Stand Alone
Static Program 1
Color Macro
Auto Program 6
Loop
Slave Group
User Color
01 - 06
Stand Alone
Static Loop 1
Color Macro
Auto Loop 4
Loop
User Color
Stand Alone User Color
Static Color 1
Color Macro
Auto Color 8
Loop
User Color
Slave Group
00
Settings
13CH02
Cyan
Cold White
20 CH
Auto Program x
Dimmer
| Speed
Auto Delay
By DMX?
Warning! Delay
0
is controllable
Yes
by DMX now!
0.0s
Loop Loop x
Dimmer
| Steptime
Fadetime
Delay
1.Step
2.Step
Static
3.Step
4.Step
Red
Color x
Green
Dimmer
Blue
| Strobe
White
Red
Green
UV
Blue
White
Amber
Blue
UV
Red Lavender
Mauve
Mode
Magenta
Slave
Yellow Pink
Green Warm White
White
Cyan Cold White
Auto Program x
Dimmer
| Speed
Auto Delay
Mode
Slave
Loop Loop x
Dimmer
| Steptime
Fadetime
Delay
1.Step
2.Step
3.Step
4.Step
Color x
Dimmer
| Strobe
Red
Green
Blue
White
Amber
UV
Mode
Slave
DMX Delay
Group
by DMX?
0 - 100
0.1s-10.0s
0%-100%
0.0s - 2.0s
Red
Color 1
Blackout
-------
0–100
0.1 s to 10.0 s
0% to 100%
0.0 s to 2.0 s
Red to CW (Cold White)
Color 1 to Color 4
UV
Blackout
„
Red to CW (Cold White)
Color 1 to Color 4
UV
Blackout
Skip step
„
0 - 100
0.1s-10.0s
0%-100%
0.0s - 2.0s
Red
Color 1
Blackout
-------
0
Yes
11