Kohler K-527 Guide De Propriétaire page 17

Choose default outlets: outlet 1 (1),
outlet 2 (2), or both (b).
Water Outlets – Set the Default (K-527, K-527-E)
Program 9: Determine the default outlet(s) that will turn on at shower
start-up.
The factory default is outlet 1.
NOTE: Both outlets (b) is only an option for K-527. Both outlets
must be enabled (Prog 8) for "b" to appear as an option. See the
"Water Outlets – Set Active Outlets" section.
Choose "Prog 9" from the settings menu.
Use the [Up] or [Down] icon to choose the outlet(s) that will turn
on at shower start-up; "1" for outlet 1, "2" for outlet 2, or "b" for
both outlets (K-527 only). Press the [Power] icon to set.
Press the [Power] icon again to return to the settings menu.
Refer to the "Settings Menu" section to access other settings or
exit the menu.
Kohler Co.
All manuals and user guides at all-guides.com
17 1214635-5-A