30" Appliances - Bosch HBL33 Guide D'installation

30" Appliances

Dimensions for 30" Wall-Mounted Units
29 3/4"
(755mm)
29 1/16"
(738mm)
22 " (559mm)
29 3/4"
(755mm)
51
3/4"
(1314mm)
22
"
English 6
24 "
(610mm)
28 1/4"
(718mm)
27 13/16"
(706mm)
27 "
(686mm)
min. 4
max. 31
7/8"
23 (606mm)
24
"
(610mm)
27
13/16"
(706mm)
51
(1299mm)
49
3/4"
(1264mm)
9
3/4"
(248mm)
23 (606mm)
7/8"
(559mm)
28 1/2"
(724mm)
3/4" (121mm)
3/8"
(797mm)
28
1/2"
(724mm)
1/8"
Single Oven 30"
It is good practice, when oven is installed
at the end of a cabinet run, adjacent to a
perpendicular wall or cabinet door, to
allow at least 1/4" space between the
side of the oven and the wall/door.
For oven support, install 2x4's extending
front to back flush with the bottom and
the side of the opening. The supporting
base must be well secured to the floor/
cabinet and level.
Note: The conduit box must be installed
either above or below the unit. If the
conduit box is installed below the unit, a
2" diameter hole or space is required
between the back wall and the right rear
of the 2x4 supports.
The cabinet base must be flat and
capable of supporting a weight of at
least 190 lbs (86 kg).
Double Oven 30"
It is good practice, when oven is
installed at the end of a cabinet run,
adjacent to a perpendicular wall or
cabinet door, to allow at least 1/4"
space between the side of the oven
and the wall/door.
For oven support, install 2x4's
extending front to back flush with the
bottom and the side of the opening.
The supporting base must be well
secured to the floor/cabinet and level.
Note: The conduit box must be located
above the unit to facilitate connecting
and servicing.
The cabinet base must be flat and
capable of supporting a weight of at
least 330 lbs (150 kg).