Ego Power+ PH1420E Mode D'emploi page 4

READ ALL INSTRUCTIONS!
EN
READ OPERATOR'S MANUAL
Residual risk!
People with electronic devices, such
as pacemakers, should consult their physician(s) before
using this product. Operation of electrical equipment
in close proximity to a heart pacemaker could cause
interference or failure of the pacemaker.
WARNING:
To ensure safety and reliability, all repairs
and replacements should be performed by a qualified
service technician.
SAFETY SYMBOLS
The purpose of safety symbols is to attract your attention to
possible dangers. The safety symbols and the explanations
with them deserve your careful attention and understand-
ing. The symbol warnings do not, by themselves, eliminate
any danger. The instructions and warnings they give are no
substitutes for proper accident prevention measures.
WARNING:
Be sure to read and understand all
safety instructions in this Operator's Manual, including
all safety alert symbols such as "DANGER," "WARNING,"
and "CAUTION" before using this tool. Failure to follow all
instructions listed below may result in electric shock, fire,
and/or serious personal injury.
SYMBOL MEANING
SAFETY ALERT SYMBOL:
WARNING, OR CAUTION. May be used in conjunction with
other symbols or pictographs.
WARNING:
tools can result in foreign objects being thrown
into your eyes, which can result in severe
eye damage. Before beginning power tool
operation, always wear safety goggles or
safety glasses with side shields and a full face
shield when needed. We recommend a Wide
Vision Safety Mask for use over eyeglasses or
standard safety glasses with side shields.
4
56 VOLT MULTI TOOL POWER HEAD — PH1420E
SAFETY INSTRUCTIONS
This page depicts and describes safety symbols that may
appear on this product. Read, understand, and follow all
instructions on the machine before attempting to assem-
ble and operate it.
Indicates DANGER,
The operation of any power
GENERAL POWER TOOL SAFETY WARNINGS
instructions. Failure to follow the warnings and instructions
may result in electric shock, fire and/or serious injury.
Indicates a potential personal
Safety Alert
injury hazard.
To reduce the risk of injury,
Read operator's user must read and understand
manual operator's manual before using
this product.
Always wear safety goggles or
Wear Eye safety glasses with side shields
Protection and a full face shield when
operating this product.
Disconnect
Alerts user to disconnect battery
battery before
before maintenance.
maintenance
Over- When winding the cutting line
temperature immediately after long time of
protection for operation, the POWERLOAD
POWERLOAD TM system may stop working due to
system over-temperature protection.
This product is in accordance
CE
with applicable EC directives.
This product is in accordance with
UKCA
applicable UK legislation.
Waste electrical products
should not be disposed of with
WEEE
household waste. Take to an
authorized recycler.
Protection against ingress of
IPX4 IP Symbol
water degree 4
V Volt Voltage
mm Millimeter Length or size
cm Centimeter Length or size
kg Kilogram Weight
Type or a characteristic of
Direct Current
current
WARNING: Read all safety warnings and
Original instructions
TM