Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
TOOLS INCLUDED:
F
6 mm T-Wrench
F
5 mm L-Wrench
PARTS INCLUDED:
F
1 Console Assembly
2 Console Masts
F
2 Console Mast Boots
F
(5.7AT & 5.9AT ONLY
F
1 Hardware Kit
F
1 Safety Key
1 Audio Adapter Cable
F
1 Bottle of Silicone Lubricant
F
(for 2 applications)
1 Crossbar
F
(5.7AT & 5.9AT ONLY)
1 Power Cord
F
1 Polar® Chest Strap (5.9AT ONLY)
NEED HELP?
If you have questions or if there
are any missing parts, contact
Customer Tech Support. Contact
information is located on the back
panel of this manual.
PRE ASSEMBLY
UNPACKING
Place the treadmill carton on a level flat surface. It is recommended that you place a protective
covering on your floor. Take CAUTION when handling and transporting this unit. Never open box
when it is on its side. Once the banding straps have been removed, do not lift or transport this unit
unless it is fully assembled and in the upright folded position, with the lock latch secure. Unpack
and assemble the unit where it will be used. The enclosed treadmill is equipped with high-pressure
shocks and may spring open if mishandled. Never grab hold of any portion of the incline frame and
)
attempt to lift or move the treadmill.
WARNING
DO NOT ATTEMPT TO LIFT THE TREADMILL! Do not move or lift treadmill from
packaging until specified to do so in the assembly instructions. You may remove the
plastic wrap from console masts.
WARNING
FAILURE TO FOLLOW THESE INSTRUCTIONS COULD RESULT IN INJURY!
NOTE: During each assembly step, ensure that ALL nuts and bolts are in place and partially
threaded in before completely tightening any ONE bolt.
NOTE: A light application of grease may aid in the installation of hardware. Any grease, such as
lithium bike grease is recommended.
9
Publicité
Table des Matières
