AFG Sport 5.5AT Manuel Du Propriétaire page 13

ASSEMBLY STEP 4
HARDWARE FOR STEP 4
PART TYPE
A BOLT
B SPRING WASHER
C FLAT WASHER
5
1
DESCRIPTION QTY
M8X1.25PX15L 4
8.2X15.0X1.2T 4
8.2X13.5X2.0T 4
6
C
B
A
4
NOTE: Be careful not to pinch any wires while
assembling the console.
A Open HARDWARE FOR STEP 4.
B Gently place the CONSOLE (5) on top of the
CONSOLE MASTS (1&4). Attach the LEFT SIDE first
using 2 BOLTS (A), 2 SPRING WASHERS (B) and
2 FLAT WASHERS (C).
C The CONSOLE CABLES (6) is tucked into the
CONSOLE MAST (4). Using the lead wire carefully
pull the CONSOLE CABLE (6) out of the CONSOLE
MAST (4). Detach and and discard the LEAD WIRE.
Connect the CONSOLE CABLES (6) and carefully tuck
wires in masts to avoid damage.
D Attach the RIGHT SIDE of the CONSOLE (5) using
2 BOLTS (A), 2 SPRING WASHERS (B) and 2 FLAT
WASHERS (C).
A B C
13