AFG Sport 5.5AT Manuel Du Propriétaire page 14

ASSEMBLY STEP 5
PART TYPE
A BOLT
3
2
14
HARDWARE FOR STEP 5
DESCRIPTION
M4X0.7PX10L
A
4
5
A
NOTE: Tighten the console mast bolts to the
frame, then the crossbar to the masts.
QTY
4
A Open HARDWARE FOR STEP 5.
B REMEMBER to tighten CROSSBAR BOLTS
into the CONSOLE MASTS(3&4) completely
now that assembly is finished. Lift DECK (1) to
upright and locked position.
C Slide LEFT CONSOLE BOOT (2) to the bottom
of the LEFT CONSOLE MAST(3). Attach
with 2 BOLTS (A) through the holes in LEFT
1
CONSOLE BOOT(2) into LEFT UPRIGHT
MAST(3).
D Slide RIGHT CONSOLE BOOT (5) to the
bottom of the RIGHT CONSOLE MAST(4).
Attach with 2 BOLTS (A) through the holes
in RIGHT CONSOLE BOOT(5) into RIGHT
UPRIGHT MAST.(4)
Before the first use, lubricate the treadmill deck by
following the instructions in the MAINTENANCE
section in the TREADMILL GUIDE.
ASSEMBLY COMPLETE!