Makita AF353 Manuel D'instruction page 6

Hook
CAUTION:
Make sure that your fingers are not
placed on the trigger or lock lever and disconnect
the hose from the tool before using the hook.
CAUTION:
Never hook the tool at high loca-
tion or on potentially unstable surface.
CAUTION:
Do not hang the hook from the
waist belt. If the nailer accidentally drops, it may
result in misfiring and personal injuries.
► 1. Hook
The hook is convenient for hanging the tool temporarily.
Hex wrench storage
When not in use, store the hex wrench as shown to
keep it from being lost.
► 1. Hex wrench
Air duster
CAUTION:
Do not aim the ejection port of the
air duster to someone. Also, keep your hands and
foot away from the ejection port. If the air duster
button is accidentally pushed, it may cause a per-
sonal injury.
CAUTION:
Always check your surroundings
before using the air duster. Blown dust or objects
may hit someone.
CAUTION:
Do not connect or disconnect the
air hose while pushing the air duster button.
The air supplied to the tool can also be used as an air
duster. You can clean the work area by pressing the
button on the grip end.
1
► 1. Button
NOTICE:
After using the air duster, the driving force
of the tool will temporarily decline. Wait until the air
1
pressure recovers in this case.
NOTICE:
Perform a test blow if you use the air
duster immediately after the oil was applied. The oil
may be sprayed with the air.
ASSEMBLY
CAUTION:
the tool, always return the trigger and lock lever
and disconnect the hose.
Loading pin nailer
CAUTION:
ing the unlock button. In case pin nails are loaded in
the magazine, the sliding door moves suddenly when
1
pressing the unlock button.
CAUTION:
slowly and carefully. Accidentally dropping pin nails
especially when working in high places may cause
personal injuries.
CAUTION:
uniform length of nails when loading nails in the
magazine.
NOTICE:
Load pin nails in the correct direction.
Loading in wrong direction may cause premature
wear and tear of the driver and damage of the other
parts.
NOTICE:
Do not use deformed connected pin
nails. Use pin nails specified in this manual. Using
pin nails other than those specified may cause pin
nail jamming and breakage of the pin nailer.
1. With holding the sliding door, press the unlock
button and move the sliding door to open.
6 ENGLISH
Before carrying out any work on
Hold the sliding door when press-
Always move the sliding door
Load the same type, size and