Joerns Oxford Journey Manuel De L'utilisateur page 7

English
3. Adjust the cow horn mechanism into one of three positions to suit either the patient task and/or
environment. To adjust the cow horn, simply pull the trigger backwards towards the rear of the
lift while holding the cow horn. Then select the desired position as indicated on the positioning
decal (1) and release the trigger to lock. The lift is now ready for operation.
Position 1
NOTE: See page 12 for cow horn position guidelines.
Disassembly
To disassemble and store the Oxford Journey follow the four easy steps shown below; please
note that no additional tools are required.
1. Lower the boom into its lowest possible position and adjust the cow horn to the storage/fold
position (as shown).
2. Ensure the rear castors are securely locked (1). Raise the knee pad to its upper most position (2).
Position 2
1
Position 3
Storage/Fold
Oxford
Journey
1
Position 1
Position 2
Position 3
Storage/Fold
2
®
7