Publicité
Les langues disponibles
Les langues disponibles
Temperature adjustment -: Press this button for a rapid decrease in
temperature. This button is also used to select the time slots when setting the daily
programming.
Setting the time / timer
On/Standby
Comfort Mode
ECO mode
Heating indicator
Wind tunnel in operation
2 / Quick Start
Once your device is correctly installed and connected to the mains, press the switch
located behind your device to switch it on. A short sound is heard and the button
lights up, the unit is in standby.
•
To push on
• When first started, the device is set as follows
(ATTENTION: If the default settings are different, it is only because the unit was
quality tested after production.):
• Heating mode: comfort
• Set temperature: 25°C
• Date: 1 (Monday)
• Time: 00:00 (Off)
• Open window function: Off
• Timer: Off
•
To switch off the device press again
3 / Setting the time and date:
In order to be able to use the device in programming mode P1/P2/P3, you must set
the time and date. Programming can only be done after setting the time.
• When your device is on standby, To change the time: hold down the button
pressed for about 3 seconds to change the time.
•
On the screen the symbol "
day (from 1 to 7)
to turn on the towel dryer.
" appears, press
, the device is in standby.
Or
to choose the
43
Publicité
