Publicité
Les langues disponibles
Les langues disponibles
Caring for the SA-21 Strip-Film Adapter
Storage
When the adapter is removed from the scanner, store it in a well-ventilated area where the
temperature is between –10 °C (14 °F) and +50 °C (+122 °F) and the humidity less than 60%.
Do not store the adapter where it would be subject to sudden temperature changes or con-
densation.
Cleaning
The SA-21 is equipped with internal rollers for feeding and ejecting fi lm. Failure to keep the
rollers clean may result in frequent "jams" in which the scanner is unable to feed or eject
the fi lm. If jams are occurring more frequently, clean the interior of the adapter as described
below. Failure to observe this precaution could result in damaged fi lm.
Place the SA-21 on a level, stable surface
1
To prevent damage to the adapter, place the SA-21 on a level, stable surface during
cleaning.
Open the front panel
2
Press the release button and open the
front panel.
Remove the adapter cover
3
Open the roller frame
4
Release the frame lock lever and open
the roller frame.
Opening the Roller Frame
Stop when resistance is felt. Attempting
to force the frame open past this point
could damage the adapter.
Continuing Jams
If jams continue to occur frequently after the interior of the adapter has been cleaned, consult a Nikon
service representative.
54
All manuals and user guides at all-guides.com
Release button
Front
panel
Frame lock lever
Adapter cover
Roller frame
Publicité
