Publicité
Les langues disponibles
Les langues disponibles
Step 2 — Insert an Adapter
Step 2 — Insert an Adapter
The adapters provided with the SUPER COOLSCAN 5000 ED and COOLSCAN V ED can be
used to scan 35-mm fi lm mounted as individual slides or in strips of two to six frames.
Choose an adapter
1
35-mm fi lm in strips of two to six frames
35-mm slides (one slide at a time)
Check the status LED
2
Make sure that the status LED is glowing steadily. Do
not insert adapters or fi lm while the status LED is blink-
ing.
Insert the adapter
3
Slide the adapter into the adapter slot. When the adapter is fully inserted, the status LED
will blink for about 30 seconds (5000 ED) or 20 seconds (COOLSCAN V ED).
Removing Adapters
Before removing adapters from the scanner, eject the fi lm or slide (
has stopped blinking. Remove adapters as shown.
Optional Holders and Adapters
Optional adapters and fi lm holders are available for a variety of fi lm, including single-frame strips of 35-
mm fi lm, APS (IX-240) fi lm cartridges, glass microscope slides, and rolls of developed 35-mm fi lm up to
forty frames in length (5000 ED only). See "Optional Holders and Adapters" (
All manuals and user guides at all-guides.com
To scan
SA-21 strip
fi lm adapter
SA-21 strip fi lm
adapter
Choose
SA-21 strip fi lm adapter
MA-21 slide mount adapter
MA-21 slide
mount adapter
38) and check that the status LED
MA-21 slide mount
adapter
48).
25
Publicité
