ingenuity SmartBounce Automatic Bouncer Pemberton Mode D'emploi page 25

ENGLISH
Using the Bounce/Music Unit
Power Button – Press the Power Button to turn ON the Bounce/music Unit.
The amber power LED illuminates and the bounce/music functions are
available. After 30 minutes, the Bounce/music Unit will stop automatically
(time out). If you turn OFF the unit using the Power Button, the bouncer and
music/sound functions are no longer active.
To use the Bounce Function: Press the Bounce Button. The left, green LED
will illuminate, indicating the bounce function is on low speed mode. If you
press the Bounce Button twice the left and right green LEDs will illuminate,
indicating the bounce function is on high speed mode. The bounce function
operates at two speeds and automatically turns OFF after 30 minutes of
continuous operation. Pressing the Bounce Button three times causes the
Bounce function to go into standby mode.
To use the Music/Sounds Function: Press the Bounce Button. The left,
green LED will illuminate, indicating the bounce function is on low speed
mode. If you press the Bounce Button twice the left and right green LEDs
will illuminate, indicating the bounce function is on high speed mode. The
bounce function operates at two speeds and automatically turns OFF after
30 minutes of continuous operation. Pressing the Bounce Button three times
causes the Bounce function to go into standby mode.
Volume Control Button – Press the Volume Control Button to alternate
between Low, Medium, High, and Mute settings.
- 25 -