Télécharger Imprimer la page

Dometic EM12-150 Guide Rapide page 8

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 16
If the battery has to be removed, first disconnect the ground connection. Disconnect all
connections and all consumers from the battery before removing it.
Only store fully charged batteries. Recharge stored batteries regularly.
Do not carry the battery by its terminals.
Safety precautions when handling lithium batteries
CAUTION! Risk of injury
Only use batteries with integrated battery management system and cell balancing.
NOTICE! Damage hazard
Only install the battery in environments with an ambient temperature of at least 0 °C.
Avoid deep discharge of the batteries.
4
Intended use
The battery monitor is intended to measure the current information about the battery charging and discharging
current from a 12 V LifePO4.
The battery monitor is not intended to be used with AGM, Gel and Wet batteries.
This product is only suitable for the intended purpose and application in accordance with these instructions.
This manual provides information that is necessary for proper installation and/or operation of the product. Poor
installation and/or improper operating or maintenance will result in unsatisfactory performance and a possible
failure.
The manufacturer accepts no liability for any injury or damage to the product resulting from:
Incorrect assembly or connection, including excess voltage
Incorrect maintenance or use of spare parts other than original spare parts provided by the manufacturer
Alterations to the product without express permission from the manufacturer
Use for purposes other than those described in this manual
Dometic reserves the right to change product appearance and product specifications.
5
Target Group
The mechanical and electrical installation and setup of the device must be performed by a qualified
technician who has demonstrated skill and knowledge related to the construction and operation of
automotive equipment and installations, and who is familiar with the applicable regulations of the
country in which the equipment is to be installed and/or used, and has received safety training to
identify and avoid the hazards involved.
6

Publicité

loading