Publicité
Les langues disponibles
Les langues disponibles
Drive belt
Adjusting / replacing the drive belt
CAUTION! When replacing the drive belt.
!
Make sure to replace with a drive belt as
specified by Husqvarna.
•
Open the blade guard. See instructions under the
heading "Fit the blade".
•
Remove the blade and the flange washers. Remove
the inner half of the blade guard and lay it on the
motor.
•
Remove the belt protector plate.
•
Loosen the 4 screws (1) holding the motor plate. Then
screw the adjuster screw (2) for the belt tensioner
under the machine, either to tension the belt or to
loosen the belt when changing.
1
•
Ensure the belt is correctly tensioned.
•
Assemble the parts in the reverse order.
MAINTENANCE AND SERVICE
2
Lubrication of adjustable stand
•
The adjustable stand can be lubricated with grease in
the guide tracks.
Repairs
All types of repairs may only be carried out by authorised
repairmen. This is so that the operators are not exposed
to great risks.
–
English
21
Publicité
