Publicité
Les langues disponibles
Les langues disponibles
REQUIREMENTS FOR INSTALLATION
(Figure 7)
The appliance is suitable for:
•
A kitchen cabinet with a minimum depth of 600 mm and a minimum width of 800 mm.
•
A working top with a recommended thickness between 20 and 30 mm.
•
A cabinet plinth with a minimum height of 100 mm.
Note:
There are accessories available for plinths with a height of up to 60 mm. Refer to the website of the
manufacturer.
•
Drawers inside the kitchen cabinet with a maximum depth of 483 mm.
•
Walls around the appliance that are heat resistant to at least 90°C and are easy to clean.
The figure shows an overview of the dimensions of the appliance after installation.
(Figure 8)
•
Make sure that the dimensions of the cabinet are suitable for installing the appliance. Refer to the figure.
•
There must be a minimum distance of 760 mm between the appliance and the kitchen furniture that is located
above the appliance.
•
There must be a distance of 50 mm between the appliance and the wall or the sides of the kitchen furniture.
•
Do not install the appliance with kitchen furniture on both sides that is higher than the appliance.
•
Make sure that the glue that is used for the cabinets and the worktop is heat resistant to at least 150°C.
•
Make sure that the walls around the appliance are heat resistant to at least 90°C.
•
Do not use wooden decoration plates or boards.
Warning:
Obey the requirements for installation.
UNPACK THE APPLIANCE
1. Remove the packaging.
Caution:
Make sure that you remove all labels and stickers from the ceramic glass.
2. Examine the appliance for damage.
3. Make sure that the voltage of the environment is the same as on the type plate.
PREPARE FOR INSTALLATION
(Figure 9)
1. Make sure that the worktop is prepared according to the dimensions of the induction hob.
2. You can install the appliance on top or flush with the worktop. Removal of the hob is more complicated if you
install the appliance flush with the worktop. The manufacturer is not liable for additional costs for the replacement
or removal of the hob.
•
Use the dimensions A if the appliance must be on top of the worktop.
•
Use the dimensions B if the appliance must be flush with the worktop.
3. Make sure that the cabinet is prepared according to the dimensions of the cooker hood.
English
•
29
Publicité
