EQUATION GMA2845 Manuel D'instructions page 97

Example
: I want to have a temperature of 20 ° C
• From Monday to Friday from 8 a.m. to 9 a.m., from 12 p.m. to 1 p.m., and from 6 p.m. to 10 p.m.
• Saturday and Sunday from 10 a.m. to 10 p.m.
Monday to
Friday
Saturday
Sunday
8h
Program 1 Active
from Monday to Friday
Program 5 Active
on no day
Open window detection
This function is used to stop heating after detecting a rapid drop in room temperature (5°C in 10 minutes) and the
impossibility of reaching the set temperature again for 30 minutes, which generally corresponds to opening a
window or door.
In this case, the display indicates "
device to delete the error message.
Thermal cutoff
A thermal security automatically cuts the device in the event of overheating (the display indicates "88"). In this
case, unplug the device, eliminate the cause of overheating, and let cool for 15 minutes before using again.
P1
8h 9h 12h
10h
Program 2 Active
on Saturday and Sunday
Program 6 Active from
Monday to Friday
" and the heating function stops. Press
op
P3
13h 18h
P2
Program 3 Active
from Monday to Friday
Program 7 Active
on no day
for 3 seconds or turn off the
97
EN
P6
22h
22h
Program 4 Active
on no day