Publicité
Les langues disponibles
Les langues disponibles
Using the timer
• The Timer function allows the heater to be put into standby mode after a user-defined time.
1 - From the control panel
• When the device is running, press
01
02
03
2 - From the remote control
• Press
to display the timer
• Set the number of hours before standby using the
During the timer adjustment, if there is no action within 10 seconds, the device leaves the adjustment
cycle and retains the last selected value.
Commands lock
• Press and keep to the beep the
• Press and keep to the beep the
Sound effect adjustment
• Press the
button on the remote control several times to choose the sound level of the effect.
low level
Current time adjustment
• Press and keep the
• Set the hours using the
• Press
to validate, the minutes flash
• Set the minutes using the
• Press
to validate, the day of the week flashes
• Set the day using the
SU
MO
Sunday
Monday
• Press
to validate. If no action is carried out within 15 seconds, validation is made automatically.
Weekly programming
• The programming mode allows you to define one or more heating periods over the day. 7 programs have been
defined by default and can be modified by the user. Each program begins with a start -up and ends with a
standby, it defines a visual effect and a set temperature, and can be activated on one or more days of the week.
several times to choose the number of hours before standby
04
05
06
button on the remote control to lock all the buttons (except the
button on the remote control to unlock all the buttons..
medium level
high level
button on the remote control until the hours flash
and
buttons of the remote control
and
buttons
and
buttons
TU
WE
Tuesday
Wednesday
07
08
09
and
buttons
off
TH
FR
Thursday
Friday
95
EN
10
11
12
off
(deactivated)
button).
SA
Saturday
Publicité
