Cutting Hairlines And Beard - SilverCrest SRRK 3.7 A1 Mode D'emploi

6.6 Cutting hairlines and beard

WARNING! Risk of injury!
The points of the beard trimmer attachment 4 are sharp.
Handle with care.
• Figure C: adjust the cutting length at the comb attach-
ment 2 according to the desired hair length. Read the cut-
ting length on the side of the comb attachment 2 at the
marking 3. The arrow symbol
length is set. Now, shorten your beard step-by-step.
NOTE: ensure that the comb attachment 2 is still firmly attached
to the device after adjustment.
• Use the device only with the beard trimmer attachment 4
and without comb attachment 2, to cut beard and hairline.
In this way you can cut hair lengths of 1 - 2 mm evenly.
16
GB
17 indicates which cutting